Author: I. D'Attomo & G. Quai Date: 22 Oct 2008
FS2002/FS2004 Rockwell-Messerschmitt X-31. The X-31 was designed to break the "stall barrier", allowing it to fly at angles of attack which would typically cause an aircraft to stall resulting in loss of control. The X-31 employs thrust vectoring paddles which are placed in the jet exhaust, allowing the aircraft to maintain control at very high angles. The X-31 also utilizes computer controlled canard wings to help keep the aircraft stable at high angles of attack. This is a full package, aircraft and panel, and it is mainly for FS2004, but it should work also in FS2002.
Author: I. D'Attomo & G. Quai Date: 22 Oct 2008
FSX Rockwell-Messerschmitt X-31. The X-31 was designed to break the "stall barrier", allowing it to fly at angles of attack which would typically cause an aircraft to stall resulting in loss of control. The X-31 employs thrust vectoring paddles which are placed in the jet exhaust, allowing the aircraft to maintain control at very high angles. The X-31 also utilizes computer controlled canard wings to help keep the aircraft stable at high angles of attack. This is a full package, aircraft and panel, for FSX.
Author: Kazunori Ito Date: 19 Oct 2008
FS2002/FS2004 Douglas F3D-2, EF-10B Skyknight. This was the world's first jet fighter designed for use as carrier-based night fighter. Its radar equipment required a wider-than-usual fuselage, so it was nicknamed "Willie the Whale". Three kind of models, clean / with pylon / with tank and missiles, and two kind of paint examples, MARINES and NAVY, are included.
Author: A. F. Scrub Date: 19 Oct 2008
FS2004/FSX Boeing F4B-1 and F4B-2 Biplane Fighter. The Boeing F4B biplane served as the primary carrier based fighter aircraft for the US Navy in the early 1930s, remaining in service in various support and training roles until the early 1940s. It was the last wooden-winged, biplane fighter produced by Boeing and used by the US Navy. You get the F4B-1 and updated F4B-2 versions.
Author: Stephan Scholz Date: 19 Oct 2008
FS2002 Otto C.I Reconnaissance Biplane. This model substitutes the previous release, now correcting scale error in overall length and landing-gear width. Twin-boom pusher reconnaissance biplane, built by Gustav Otto in 1915, with box-shaped booms and fuselage gondola, powered by a 165 hp Benz Bz.III pusher engine. The design was renowned for its stable, reliable yet nimble behaviour and good handling characteristics both on the ground and in the air. It was in service in small numbers at Udovo airfiled in 1916. AFX and PCX source files also included.
Author: Stephan Scholz Date: 19 Oct 2008
FS98 Otto C.I Reconnaissance Biplane. This model substitutes the previous release, now correcting scale error in overall length and landing-gear width. Twin-boom pusher reconnaissance biplane, built by Gustav Otto in 1915, with box-shaped booms and fuselage gondola, powered by a 165 hp Benz Bz.III pusher engine. The design was renowned for its stable, reliable yet nimble behaviour and good handling characteristics both on the ground and in the air. It was in service in small numbers at Udovo airfiled in 1916. AFX and PCX source files also included.
Author: Udo Entenmann Date: 04 Oct 2008
FS98/CFS Shenyang J8 Finback-A. The J8 is basically a Sukhoi Su-11 derivate, produced by the chinese Shenyang Aircraft Company. The J8 went into service with the PLAAF, People's Liberation Army Air Force, 1980 as an all-weather interceptor.
Author: Evren Yaglikci Date: 04 Oct 2008
FS2004/FSX Airbus A-321, Atlasjet. The aircraft model includes most of the standard features including animated control surfaces, wingviews, flaps, full lighting configuration, and highly detailed, reflective textures.
Author: Camil Valiquette Date: 01 Oct 2008
FS2004 Airbus A-350-1000-XWB, Air Caraibes. Airbus A-350-1000-XWB, Extra Wide Body, including 3 aircrafts with different new Animated Ground Servicing, AGS.
Author: Camil Valiquette Date: 01 Oct 2008
FSX Airbus A-350-1000-XWB, Air Caraibes. Airbus A-350-1000-XWB, Extra Wide Body, including a different new Animated Ground Servicing, AGS.
Author: Paul Clawson Date: 01 Oct 2008
FSX Potez 540. The Potez 540 was a Recon plane and bomber that served the French, Spanish and Romanian Air Arms from 1934 up to WW2. This is a true native FSX model. It is painted for the Escadrille GR 11/33 Armee de l'air circa 1937. It has the usual animations, plus retracting bottom turret, reflective glass, .dds textures and a limited amount of "bump" mapping. It has a Hispano-Suiza sound file courtesy of "Law Dog". The 2D panel and VC are based on a photo and the VC has animated flight controls.
Author: Stephan Scholz Date: 01 Oct 2008
FS98/FS2000/FS2002 Zeppelin Staaken R.VI. 1918 Schütte Lanz license-built 4-engined Zeppelin Staaken R.VI giant biplane Nr. 27/16, capable of payloads of upto 2 tonnes. It was powered by 4x267 Hp high-compression Mercedes D.IVa engines, altitude rated at 1300 metres and 1450 rpm. Improved model now featuring cabin-roof windows, wheel-hubs, gunner wells and patterned textures.
Author: Stephan Scholz Date: 01 Oct 2008
FS98/FS2000/FS2002 Zeppelin Staaken R.VI, Fix. New model file for Zep_R6.zip and ZepR62k2.zip. Aircraft Animator motion range reduction to 22% as rudders were cutting into elevators and ailerons moving too far. Also, Tdcfsview correction to reduce FS2002 aircraft library image size.
